Product Description
Factory price Fertilizer roller press granulator machine
Introduction of Fertilizer roller press granulator machine
DZJ series Fertilizer roller press granulator machine is a kind of extrusion fertilizer granulating equipment, which can produce NPK compound fertilizer of various concentrations. It is widely applied to fertilizer processing, feed production and chemical industry for granulation, production and processing of powder materials. DZJ roller press fertilizer granulating machine has a wide range of raw materials, such as ammonium carbonate, ammonium chloride, ammonium sulfate, ammonium nitrate, ammonium phosphate, magnesium sulfate, magnesium silicate, zinc sulfate and phosphorus pentoxide. The finished granules of the granule machine are very good. And the moisture content of granules prepared by dry powder is low.
Working principle of double roller granulator machine
This series of fertilizer roller granulator machine is a extruded model, and its working principle is as follows:
Electromotor drive the belt and pulley, then it is transmitted to the driving shaft by the speed reducer, and by synchronizing the open gear with the passive shaft, achieving the working in the same direction. Material is added from the hopper, after the roll extrusion forming, demoulding pelletizing; and through a chain, the balls are transferred to the broken screen studio, sieving and isolate the finished products (the balls), then return to mix with new materials and granulate again.
Apply Material of double roller press granulator
1. Nitrogen fertilizers: ammonium chloride, ammonium sulfate, ammonium sulphate etc.
2. Potassic fertilizers: potassium sulfate, potassium chloride,plant ash etc.
3. Phosphate fertilizer:Superphosphate, triple superphosphate, calcium magnesium phosphate
Advantages of double roller granulator
1. Without pre drying process, granulation at normal temperature and molded at 1 time. No need any fuel like oil, coal, gas, etc. The roller granulator has the characteristics of lower for investment, fast capital-turnover and good economic returns.
2.The structure of the fertilizer granulating machine adopts granulation, molding and screening as one, which has the advantages of beautiful appearance, simple operation and low energy consumption.
3. For roller sheet, its material is made of a new type of metal with corrosion resistance, with strong strength and weary-resistance characteristics, which can have a longlast service life. anti-corrosion casting frame for bearing.
4. Dry process of granulating, no need any binder when forming granule, which will protect the fertilizer from bonding & agglomeration, also it will save enery because of streamlined processes
5. Dual input transfer mode, which not only improves the input power ratio, but also ensures the lubrication and sealing performance of the transmission gear.
6. Compact structure, good stability, good sealing, low noise, convenient operation and maintenance.
7. CZPT Bearing & Simens Brand Motor
Technical Parameters of granulator machine
|
Model |
DZJ-I 1.0 |
DZJ-I 2.0 |
DZJ-I 3.0 |
DZJ-I 4.0 |
DZJ-II 1.0 |
DZJ-II 2.0 |
|
Capacity(t/h) |
1~1.5 |
1.5~2.5 |
2.0~3.0 |
3.0~4.0 |
1~2 |
1.5~2.5 |
|
Power( kw) |
15kW |
18.5kW |
22kW |
30kW |
15kW |
18.5kW |
|
Pressure Roller Spec |
Φ150×220 |
Φ150×300 |
Φ186×300 |
Φ300×300 |
Φ150×220 |
Φ150×300 |
|
Feed Size |
≤0.5mm |
≤0.5mm |
≤0.5mm |
≤0.5mm |
≤0.5mm |
≤0.5mm |
|
Finished Product Spec |
Φ2.5~Φ10 |
Φ2.5~Φ10 |
Φ2.5~Φ20 |
Φ2.5~Φ30 |
Φ2.5~Φ10 |
Φ2.5~Φ20 |
|
Speed Reducer Model |
ZQH350 |
ZQH400 |
ZQH400 |
ZQH500 |
special |
special |
|
Material Moisture |
2%~5% |
2%~5% |
2%~5% |
2%~5% |
2%~5% |
2%~5% |
Now Contact us to get best price of Fertilizer roller press granulator machine immediately.
How to use the pulley system
Using a pulley system is a great way to move things around your home, but how do you use a pulley system? Let’s look at the basic equations that describe a pulley system, the types of pulleys, and some safety considerations when using pulleys. Here are some examples. Don’t worry, you’ll find all the information you need in 1 place!
Basic equations of pulley systems
The pulley system consists of pulleys and chords. When the weight of the load is pulled through the rope, it slides through the groove and ends up on the other side. When the weight moves, the applied force must travel nx distance. The distance is in meters. If there are 4 pulleys, the distance the rope will travel will be 2×24. If there are n pulleys, the distance traveled by the weight will be 2n – 1.
The mechanical advantage of the pulley system increases with distance. The greater the distance over which the force is applied, the greater the leverage of the system. For example, if a set of pulleys is used to lift the load, 1 should be attached to the load and the other to the stand. The load itself does not move. Therefore, the distance between the blocks must be shortened, and the length of the line circulating between the pulleys must be shortened.
Another way to think about the acceleration of a pulley system is to think of ropes and ropes as massless and frictionless. Assuming the rope and pulley are massless, they should have the same magnitude and direction of motion. However, in this case the quality of the string is a variable that is not overdone. Therefore, the tension vector on the block is labeled with the same variable name as the pulley.
The calculation of the pulley system is relatively simple. Five mechanical advantages of the pulley system can be found. This is because the number of ropes supporting the load is equal to the force exerted on the ropes. When the ropes all move in the same direction, they have 2 mechanical advantages. Alternatively, you can use a combination of movable and fixed pulleys to reduce the force.
When calculating forces in a pulley system, you can use Newton’s laws of motion. Newton’s second law deals with acceleration and force. The fourth law tells us that tension and gravity are in equilibrium. This is useful if you need to lift heavy objects. The laws of motion help with calculations and can help you better understand pulley systems.
Types of pulleys
Different types of pulleys are commonly used for various purposes, including lifting. Some pulleys are flexible, which means they can move freely around a central axis and can change the direction of force. Some are fixed, such as hinges, and are usually used for heavier loads. Others are movable, such as coiled ropes. Whatever the purpose, pulleys are very useful in raising and lowering objects.
Pulleys are common in many different applications, from elevators and cargo lift systems to lights and curtains. They are also used in sewing machine motors and sliding doors. Garage and patio doors are often equipped with pulleys. Rock climbers use a pulley system to climb rocks safely. These pulley systems have different types of pinions that allow them to balance weight and force direction.
The most common type of pulley is the pulley pulley system. The pulley system utilizes mechanical advantages to lift weight. Archimedes is thought to have discovered the pulley around 250 BC. in ancient Sicily. Mesopotamians also used pulleys, they used ropes to lift water and windmills. Pulley systems can even be found at Stonehenge.
Another type of pulley is called a compound pulley. It consists of a set of parallel pulleys that increase the force required to move large objects. This type is most commonly used in rock climbing and sailing, while composite pulleys can also be found in theater curtains. If you’re wondering the difference between these 2 types of pulleys, here’s a quick overview:
Mechanical Advantages of Pulley Systems
Pulley systems offer significant mechanical advantages. The ability of the system to reduce the effort required to lift weights increases with the number of rope loops. This advantage is proportional to the number of loops in the system. If the rope had only 1 loop, then a single weight would require the same amount of force to pull. But by adding extra cycles, the force required will be reduced.
The pulley system has the advantage of changing the direction of the force. This makes it easier to move heavy objects. They come in both fixed and mobile. Pulleys are used in many engineering applications because they can be combined with other mechanisms. If you want to know what a pulley can do, read on! Here are some examples. Therefore, you will understand how they are used in engineering.
Single-acting pulleys do not change direction, but compound pulleys do. Their mechanical advantage is six. The compound pulley system consists of a movable pulley and a fixed pulley. The mechanical advantage of the pulley system increases as the number of movable wheels decreases. So if you have 2 wheels, you need twice as much force to lift the same weight because you need a movable pulley.
The mechanical advantage of a pulley system can be maximized by adding more pulleys or rope lengths. For example, if you have a single pulley system, the mechanical advantage is 1 of the smallest. By using 2 or 3 pulleys, up to 5 times the mechanical advantage can be achieved. You can also gain up to 10 times the mechanical advantage by using multiple pulley systems.
The use of a single movable pulley system also adds to the mechanical advantage of the pulley system. In this case, you don’t have to change the direction of the force to lift the weight. In contrast, a movable pulley system requires you to move the rope farther to generate the same force. Using a compound pulley system allows you to lift heavy loads with ease.
Safety Issues When Using Pulley Systems
Pulleys have an incredibly unique structure, consisting of a disc with a groove in the middle and a shaft running through it. A rope or cord is attached to 1 end of a pulley that turns when force is applied. The other end of the rope is attached to the load. This mechanical advantage means that it is much easier to pull an object using the pulley system than to lift the same object by hand.
Although pulley systems are a common part of many manufacturing processes, some employers do not train their workers to use them properly or install protection to prevent injury. It is important to wear proper PPE and follow standard laboratory safety practices during pulley system activities. Make sure any support structures are strong enough to handle the weight and weight of the rope or rope. If you do fall, be sure to contact your employer immediately.
