Product Description
3500W DMX512 Low Ground Fog Machine Stage Smoke Machine Hazer Speical Effects
Description:
This Dry Ice Fog Machine Inclued Pipe,it cost USD40 for pipe.
Dry Ice Fog Machine -3500W
This is a new designed Dry Ice Fog Machine. It used the high strength compound material which is one-step molding. The weight is 13.5 kg , and it falls down from 10m without crack. You can put 8 Kg dry ice inside the machine at most, spray in rapid with large smoke. The machine is easy to use and the smoke can cover about 300 square Meter. After the machine fill up the dry ice. It can spray about 5 minutes when 100% output, and 10 minutes when 50% output. Freestyle pulleys base, is so easy to use. Retractable hose, meet different needs of the scene.
Features:
2. Light in weight, small in size . It is just 13.5KG heavy. (The traditional stainless steel dry ice car spray output can cover 300 SQM, but it is over 40 KG heavy at least . And the size is above 2 times bigger than X-1).
3. Smoke output is swift and violent, you can put at least 8Kg dry ice inside . And the spray output can cover about 300 SQM square at most.
4. After the machine fill up the dry ice. It can spray about 5 minutes when 100% output, and 10 minutes when 50% output.
5. The spray volume can be controlled with 2 gear. All of the metal parts are stainless steel , so it is durable in use .
6. With 3000W and 6000W 2 group electric heating system . And the heating system can be selected.
7. As the circuit is very simple , it used the aerodynamics , doesn’ t need the fan to dispel the smoke . So the failure rate is very low .
8. It’ s very convenient to pour out the water after perfomance .
9. Auto power cut off
10.Weight:20KG
11.Voltage:100-240V
12.Power:3000W
6000W Dry Ice Fog Machine,Ground Fog Machine,Special Effects,Smoke Machine
keywords
LED Par Light ,Laser Light,Moving Head Beam Light,Stage Special Effects,DMX Controller, Light
Truss,Stage Light Clamp/Hanger,LED Dance Floor,LED Effect Light
Stage Light Application:
Wedding Party ,DJ KTV Club,Disco Bar,Cinema,Event Productions.Theater, TV Broadcast Studio,Mobile Event ETC
Company Profile:
HangZhou Sailwin Light Audio is a comprehensive high-tech company. Which develops and manufacture innovative quality Stage Lighting fixtures(LED Moving Head Light,Moving Head Beam,LED Par Light,LED Battery Powered Par,Laser Light ,LED City Color Light,LED Fog Machine,Special Effects,LED Wall Washer etc) for live production,touring markets, memorable events as well as for permanent installation in theaters, broadcast studios, houses of worship, club Bar Wedding and mobile event venues.
The Advantage of SAILWIN Cooperator:
|
USA Warehouse |
USA Warehouse Located In Califonia And Tennessee Which Can ship goods timely and save buyer more import VAT TAX.Most important Nearby buyer can get fast and professional after sale service and Technical Help. |
|
UK Warehouse |
UK Warehouse Located in Manchester,Which Can ship to the whole EU Countries With Free Import VAT TAX.Importantly Customer can received goods timly Within 3-4 Days. |
|
Stable Main Parts |
Middle High End-Class Qualified Stage Light Manafacturer Power Supply is High Power for Light input&output. Motherboard is from our own engnieer Draw Program. LED Lamp is from ZheJiang Chip with high brightness and full power capacity |
| Product Video Link |
SAILWIN TRADE TERMS:
| Trade Terms | EXW/FOB HangZhou |
| Payment Terms | TT/Paypal/Moneygram/Credit Card |
| OED/ODM Service | Support |
| Package | Standard Export Carton/Flightcase |
| Lead Time | 4-5 Days for sample order,10-15days for bulk order |
| Warranty | 1 Year |
| After Sale Service | Solved within 3 days after received problem Video or Photo |
FAQ
Q: Are you a factory or trading company?
A: We are manufacturer with export qualification, provide competitive factory price.
Q: How to get the latest price?
A: If you want the latest price, Please email or call us with the items names or No. and your needing quantity you are interested in, or send us your inquiry at the bottom of the product page.
Q: Do the products have any certificate?
A: Yes, our products have CE and ROHS EMC and LVD certification, please contact us if you need other certifications.
Q: How to place an order?
A: Please kindly send us your order by email, we will confirm the quotation with you. We wish to know the information: delivery information (name, company, address, zip code, mobile/telephone number, transportation way) and production information (product details, order quantity, customized logo or not, etc.)
Q: Can you help me to print our logo or company name on the products or package?
A: Of course yes, OEM&ODM order is warmly welcomed.we have our laser printing machine
Q. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks according to order quantity
Q. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional
Types of pulleys and their advantages and disadvantages
There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
Basic equations of pulley systems
A pulley system is a mechanism that allows 2 blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the 2 blocks is the total tension and the force acting on the pulley is the weight of the 2 blocks.
This simple mechanism uses 2 simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
Types of pulleys
There are 3 basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The 2 most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than 1 “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than 1 type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are 3 main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have 1 advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.
application
What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
shortcoming
Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which 2 pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to 4 times their force when used in hydraulic lifts.
